SERVICES
Technical cleaning using the power of water is particularly environmentally friendly, highly efficient and gentle on materials. The water emerges through a high-pressure nozzle as a sharp, focused jet with a high cleaning effect. The additional use of hot water high-pressure technology offers various options for reducing the working pressure, the time used and the amount of cleaning agents used.
1. High pressure technology - hot water
- 1.1 High pressure technology - hot water
- 1.2 High pressure technology - hot water
- 1.3 High pressure technology - hot water
- 1.4 High pressure technician
- 1.5 Arrival and departure Departure service vehicle
up to 2500 bar, 20 to 40 L/min
up to 500 bar, 14 to 30 L/min
up to 250 bar
with high pressure technology hot water including 1 high pressure technician
2. High pressure technology - cold water
- 2.1 High pressure technology - cold water
- 2.2 High pressure technology - cold water
- 2.3 High pressure technician
- 2.4 Arrival and departure Departure service vehicle
up to 2500 bar, 20 to 40 L/min
up to 250 bar
with high pressure cold water technology incl. 1 high pressure technician
3. Industry - suction technology
- 3.1 Air suction device
- 3.2 Air suction device
- 3.3 Industrial vacuum cleaner wet / dry
- 3.4 Industrial cleaner
- 3.5 Service vehicle
- 3.6 Arrival and departure service vehicle
explosion-proof, for compressed air supply, up to 470 m³/h
explosion-proof, 400 volt connection, up to 400 m³/h
with suction technology, incl. 1 industrial cleaner
4. Suction and pumps
Incl. 1 Vacu-Press technician
5. Special accessories
- 5.1 Mobile scaffolding aluminum
- 5.2 Fall protection / light breathing protection
- 5.3 Industrial cleaner
L 3000 x B 2000 x H 3000 mm
Tank cleaning
- Scope of delivery and service of the client (AG)
- The work and services listed below are carried out by the client (AG)
- Provision of the sanitary and changing rooms in consultation Provision of a forklift, use after instruction by the client
- Stationary crane systems may be used, use after consultation and instruction by the client
- Intended interim and final acceptance are carried out by AG
- Provision of waste containers on the shipyard site including disposal of the residual materials
- Provision of lighting, ventilation
- Opening / closing and measuring the tanks
- Provision of the necessary scaffolding
- Provision of water, compressed air (max. 5 bar) and electricity from / to on-site connection
- Space to set up a tool container (approx. 2x2m) of the contractor
1. Gray / water ballast tanks
- 1.1 Cleaning of GW / WB side tanks
- 1.2 Cleaning of GW / WB - double floor tanks, 1-1.5m high
- 1.3 Cleaning of GW / WB - double bottom tanks, 0.5-1m high
- 1.4 Eremove the remaining quantities and sediments from the tank
Removal of adherence from all freely accessible surfaces, using high pressure water technology up to 300 bar or manual cleaning including personnel costs
Unit: sqm
Unit: sqm
Removal of adherence from all freely accessible surfaces, using high pressure water technology up to 300 bar or manual cleaning including personnel costs
Unit: sqm
Unit: sqm
Removal of adherence from all freely accessible surfaces, using high pressure water technology up to 300 bar or manual cleaning including personnel costs
Unit: hour
Unit: hour
including wash water and personnel costs
(without disposal)
Unit: hour
(without disposal)
Unit: hour
2. Blackwater-Tank
- 2.1 Cleaning of BW side tanks
- 2.2 Cleaning of BW double floor tanks, 1-1.5 m high
- 2.3 Cleaning of BW double floor tanks, 0.5-1m high
- 2.4 Remove the remaining quantities and sediments from the tank
Removal of adherence from all freely accessible surfaces, using high pressure water technology up to 300 bar or manual cleaning including personnel costs
Unit: sqm
Unit: sqm
Removal of adherence from all freely accessible surfaces, using high pressure water technology up to 300 bar or manual cleaning including personnel costs
Unit: sqm
Unit: sqm
Removal of adherence from all freely accessible surfaces, using high pressure water technology up to 300 bar or manual cleaning including personnel costs
Unit: hour
Unit: hour
including wash water and personnel costs
(without disposal)
Unit: hour
(without disposal)
Unit: hour
3. HFO - Tank
- 3.1 Cleaning of HFO - side tanks
- 3.2 Cleaning of HFO - double floor tanks, 1-1,5m high
- 3.3 Cleaning of HFO - double floor tanks, 0,5-1m high
- 3.4 Remove the remaining quantities and sediments from the tank
Removal of adherence from all freely accessible surfaces, using high pressure water technology up to 300 bar or manual cleaning including personnel costs
Unit: sqm / inspection, sqm / hot work
Unit: sqm / inspection, sqm / hot work
Removal of adherence from all freely accessible surfaces, using high-pressure water technology up to 300 bar or manual cleaning including personnel costs
Unit: sqm / inspection, sqm / hot work
Unit: sqm / inspection, sqm / hot work
Removal of adherence from all freely accessible surfaces, using high-pressure water technology up to 300 bar or manual cleaning including personnel costs
Unit: sqm
Unit: sqm
including wash water and personnel costs
(without disposal)
Unit: hour
(without disposal)
Unit: hour
4. MDO - Dieseltank
- 4.1 Cleaning of MDO - side tanks
- 4.2 Cleaning of MDO - double floor tanks, 1-1,5m high
- 4.3 Cleaning of MDO - double floor tanks, 0,5-1m high
- 4.4 Remove the remaining quantities and sediments from the tank
Removal of adherence from all freely accessible surfaces, using high pressure water technology up to 300 bar or manual cleaning including personnel costs
Unit: sqm / inspection, sqm / hot work
Unit: sqm / inspection, sqm / hot work
Removal of adherence from all freely accessible surfaces, using high pressure water technology up to 300 bar or manual cleaning including personnel costs
Unit: sqm / inspection, sqm / hot work
Unit: sqm / inspection, sqm / hot work
Removal of adherence from all freely accessible surfaces, using high pressure water technology up to 300 bar or manual cleaning including personnel costs
Unit: sqm
Unit: sqm
including wash water and personnel costs
(without disposal)
Unit: hour
(without disposal)
Unit: hour
5. Sludge - Tank
- 5.1 Cleaning of Sludge - side tanks
- 5.2 Cleaning of Sludge - double floor tanks, 1-1,5m high
- 5.3 Cleaning of Sludge - double floor tanks, 0,5-1m high
- 5.4 Remove the remaining quantities and sediments from the tank
Removal of adherence from all freely accessible surfaces, using high pressure water technology up to 300 bar or manual cleaning including personnel costs
Unit: sqm / inspection, sqm / hot work
Unit: sqm / inspection, sqm / hot work
Removal of adherence from all freely accessible surfaces, using high pressure water technology up to 300 bar or manual cleaning including personnel costs
Unit: sqm / inspection, sqm / hot work
Unit: sqm / inspection, sqm / hot work
Removal of adherence from all freely accessible surfaces, using high pressure water technology up to 300 bar or manual cleaning including personnel costs
Unit: sqm
Unit: sqm
including wash water and personnel costs
(without disposal)
Unit: hour
(without disposal)
Unit: hour
6. Bilgewater - Tank
- 6.1 Cleaning of Bilgewater - side tanks
- 6.2 Cleaning of Bilgewater - double floor tanks, 1-1,5m high
- 6.3 Cleaning of Bilgewater - double floor tanks, 0,5-1m high
- 6.4 Remove the remaining quantities and sediments from the tank
Removal of adherence from all freely accessible surfaces, using high-pressure water technology up to 300 bar or manual cleaning including personnel costs
Unit: sqm / inspection, sqm / hot work
Unit: sqm / inspection, sqm / hot work
Removal of adherence from all freely accessible surfaces, using high-pressure water technology up to 300 bar or manual cleaning including personnel costs
Unit: sqm / inspection, sqm / hot work
Unit: sqm / inspection, sqm / hot work
Removal of adherence from all freely accessible surfaces, using high-pressure water technology up to 300 bar or manual cleaning including personnel costs
Unit: sqm
Unit: sqm
including wash water and personnel costs
(without disposal)
Unit: hour
(without disposal)
Unit: hour
7. Clean Seawater Crossover channels
Removal of adhesion from all freely accessible surfaces, using high-pressure water technology up to 500 bar or manual cleaning, including personnel costs
Unit: sqm
Unit: sqm
including wash water and personnel costs
(without disposal)
Unit: sqm
(without disposal)
Unit: sqm
8. Special accessories
- 8.1 Construction site equipment
- 8.2 Lay flange and hoses
- 8.3 Pump
- 8.4 Hoses
- 8.5 Technician (hose guard)
(only for initial setup up to 20 qm tanks)
Unit: flat rate
Unit: flat rate
up to 100 running meters
Unit: daily rate
Unit: daily rate
Lay out a solid pump including 100 running meters of hose
Unit: daily rate
Unit: daily rate
every further 100 running meters of hose
Unit: daily rate
Unit: daily rate
Unit: hour
9. Disposal costs
Disposal costs for HFO, MDO, sludge, wash water, etc. - with sample on request
Unit: flat rate
Unit: flat rate
Disposal costs for HFO, MDO, sludge, wash water, etc. - with sample on request
Unit: flat rate
Unit: flat rate
Our industrial service offers you an all-round service, from planning to implementation. Whether in maintenance, procurement, production or transportation of all kinds, we stand by your side for your success. Competent and long-term partners complete our entire product portfolio to become a powerful all-rounder in the field of industrial services.
25 % from the 9th working hour
25 % Monday to Friday from 5 p.m. to 10 p.m.
50 % Monday to Saturday from 10 p.m. to 7 a.m.
25 % Saturday from 7 a.m. to 1 p.m.
50 % Saturday from 1:00 p.m. to 12:00 a.m.
100 % Sundays and public holidays from midnight to midnight
In our business hours from Monday to Friday from 7:00 a.m. to 5:00 p.m. there are no surcharges.